Filter
Top Products
E-20
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
AMPLIFIER
• Connect the audio signal cable to either the digital output or the analog audio output.
* The signal input as digital input is not output as analog audio.
*The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
AUDIO
INPUT
VIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTURE
INPUT
DIGITAL
AUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO
VIDEO5
VIDEO1
Y P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
Y P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
RGB2
RGB1
DVI
SCART SCARTSCART
Rear side of selector
To digital audio input
To analog audio input
To analog audio output To digital audio output
DVD PLAYER
• Connect the video signal cable to either the component video terminal or the SCART terminal.
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
AUDIO
INPUT
VIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTURE
INPUT
DIGITAL
AUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO
VIDEO5
VIDEO1
Y P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
Y P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
RGB2
RGB1
DVI
SCART SCARTSCART
To component video
output
To audio outputs
To audio inputs
To component
video input
Rear side of selector
To SCART output
To SCART input
03.10.24, 0:47 PMPage 20
Downloaded From TV-Manual.com Manuals