Filter
Top Products
E-44
* On-screen information disappears if you do not take any action for about 60 seconds.
• Specifying RGB Input Signal (Code Setting) for RGB2, RGB3
Normally, use this option in Auto mode.
•Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press or , one of the available choices appears in the following sequence:
On
Off
Off: Does not display white.
On: Displays a white screen immediately.
Press
to store.
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Illumination
You can to select to display a blue illumination on the front of the tuner.
Each time or is pressed, the setting is changed.
Off
On
Off: Illumination is turned off.
On: Illumination is turned on.
Press
to store.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press .
The “Information” screen will appear.
Mode: Input mode appears at the upper right corner of the screen.
Freq. Scan Mode: Frequency scanning
Input Signal: Video mode
Input Sync.: Signal type
Freq.: Synchronized signal frequency, polarity
Preset No.: RGB code number
Information screen (Video Mode)
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
Information screen (RGB Mode)
03.10.24, 1:32 PMPage 44
Downloaded From TV-Manual.com Manuals