ScanSnap S510 Getting Started | 21
Symptom Check This Item Remedy
The text recognition accuracy
decreases significantly when
you execute "Scan to Word /
Excel / PowerPoint(R)."
Did you try to scan documents having
extremely small characters? Or, did you try to
scan low-quality documents having smeared or
unclear characters?
Note: The optimum scanning settings depend
on the document type. Find the most suitable
settings in "Remedy" on the right.
In the [ScanSnap Manager - Scan and Save
Settings] dialog box, select "Better," "Best," or
"Excellent" at [Image quality:] on the [Scanning]
tab and scan the document again.(Note that it
takes time to recognize characters when you
select "Excellent" as this option enlarges the size
of the image data.)
In the [ScanSnap Manager - Scan and Save
Settings] dialog box, slide the control toward
"Low" for "Compression rate" on the
[Compression] tab and scan the document again.
Depending on the document type, the scanned
results may not be as expected, or the characters
may not be correctly recognized. For more
information, refer to "About the OCR function of
ABBYY FineReader for ScanSnap" in Section
5.5 "Converting into Word / Excel / PowerPoint
Files" in the "ScanSnap S510 Operator's Guide."
Is the document to scan skewed? The more the document is skewed, the greater the
possibility of character misrecognition.
Neatly align the document edges to the side
guides of the scanner and retry scanning.
*1) To confirm whether the scanner is connected with USB1.1 or USB2.0, right-click ScanSnap Manager icon on the task bar and select
[Help] [About ScanSnap Manager], then click [Detail] button on "Version Information" window. [USB type] is displayed in
[Scanner and driver information].
*2) A "Multi-feed" is a phenomenon where two or more sheets of paper are fed simultaneously into the scanner.
Visit our Web site for your reference. Other useful information will be posted on the FAQ corner at the following Web site.
http://scansnap.fujitsu.com
4.2. Clearing Paper Jams
1. Open the ADF while pulling the Cover open lever.
2. Remove the jammed document.
3. Close the ADF.
You should hear the ADF click when it returns to its original position.
Click!
S
C
A
N
P
O
W
E
R