Filter
Top Products
TX300 S6 Options Guide 17
2Procedure
V CAUTION!
● The actions described in this manual shall be performed by technical
specialists. A technical specialist is a person who is trained to install
the server including hardware and software.
● Repairs to the device that do not relate to CSS failures shall be
performed by service personnel. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.
● Any failure to observe the guidelines in this manual, and any improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) or damage the equipment.
Ê First of all, carefully read the safety instructions in the chapter "Safety
instructions" on page 19.
Ê Make sure that all necessary manuals (see the section "Documentation
overview" on page 12) are available; print the PDF files if required. Most
importantly, you will need the Operating Manual for the server and the
Technical Manual for the system board.
Ê Shut the server down correctly, switch it off, disconnect the power cords and
open the server as described in the chapter chapter "Preparation" on
page 27.
Ê Carry out the expansion or upgrade of your server as described in the
pertinent chapter.
I Installation and removal of the hot-plug components are described in
the Operating Manual.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter chapter "Completion" on page 105.
Ê Start the operating system and make the appropriate configuration if
necessary (see the Operating Manual).
I For the latest information on optional products provided for the
TX300 S6 see the configurator of this server:
https://sp.ts.fujitsu.com/dmsp/docs/cnfgtx300s6.pdf