Filter
Top Products
TX300 S6 Options Guide 71
Accessible drives and LSD/LSP HDD extension box
Figure 44: Cabling SAS cable
Ê Connect the SAS cable included to the connector X1 of the HDD backplane
of the Multibay 2 (1).
Ê Connect the SAS cable included to the connector MLC2 of the 3.5-inch HDD
backplane (2).
Ê Route the SAS cable through the cable guides as shown.
Ê Connect the SAS cable to the connector MLC2 of the RAID controller (3).
Ê Reinstall the cable cover as described on page 91.
Ê Reinstall the fan carrier as described in the section "Installing the fan carrier"
on page 105.
Ê Attach the front cover or the rack front cover as described in the section
"Attaching the front cover" on page 108 or in the section "Attaching the rack
front cover" on page 111.
1
2
0