Filter
Top Products
3
Desktop mounting
The display unit can be mounted on a desktop, using the optional bracket (Type:
FP10-02510, Code No.: 001-414-510).
1. Fasten the mounting base (lower) to the mounting location with four sets of hex head
bolts, spring washers, flat washers and nuts.
FRONT
Hex Head Bolt
Spring Washer
Flat Washer
Nut
Mounting base (lower)
2. Fasten the bracket and mounting plate to the mounting base (upper) with 12 hex head
bolts. Fasten the mounting plate at the rear for 9° tilt, or at the front for 20° tilt.
Hanger
Mounting Plate
Mounting Base
(upper)
REAR
FRONT
Hanger
Mounting Plate
Mounting Base
(upper)
9 degree TILT 20 degree TILT
Fastening bracket and mounting plate to mounting base (upper)