Filter
Top Products
Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04)
39
www GarrettCom com
..
RJ10MST,6KP4-
4 Port@ 10Mb ST Fiber Port
2
2 6
T
LK RX
ACT
HF/
TX RX
LK
ACT
HF/
TX R XLK
ACT
HF/
TX RXLK
ACT
HF/
1 5
3
1
FULL/HALF
1
ACTIVITY
LINK
2
3
The Magnum 6KP4-F10ST
is a 10Mb multi-mode
fiber module with 4 ST-
Fiber ports. All four fiber
ports are ST connectors
and configured as 10Mb
Half-duplex by default.
The 10Mb ST-fiber ports
allow the user to connect
their legacy 10Mb network
to the Magnum 6K16V
switch. They also provide a convenient way for the half duplex
hub to connect to the switch through 10Mb fiber ports. It supports distances according to
the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km
distance may be available as a special order).
Each port has an Activity (ACT) LED indicating packets being
received, a Link (LK) LED indicating proper connectivity with the remote device when
lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).
5.2.1c 6KP4-FLSTFX, 2@10Mb & 2@100Mb multi-mode FX-ST “twist
lock” Module
6KP4-RJ10MST,
4 Port@ 10Mb ST Fiber Port
2
2 6
T
LK RX
ACT
HF/
TX RX
LK
ACT
HF/
TX R XLK
ACT
HF/
TX RXLK
ACT
HF/
1 5
1
3
ACTIVITY
LINK
1
2
3
FULL/HALF
The Magnum 6KP4-
FLSTFX is a combo fiber
module with two 10Mb +
two 100Mb multi-mode
fiber module and in
combine 4 ST-Fiber ports.
All four fiber ports are ST
connectors and configured
as 10Mb Half-duplex by
default for 10Mb fiber and
100Mb Full duplex for the
100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb
network to the Magnum 6K16V switch. They also provide a convenient way for the half
duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST