Filter
Top Products
Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04)
5.2.10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode
FX , LC Small-Form-Factor
The Magnum 6KP8-45SLC eight port Module is a combo module with copper
and fiber (Small Form Factor) LC type fiber ports.
The small size of LC connectors
give an advantage of placing more
ports on one module. The 6KP8-
45-2SLC is equipped with 6
10/100 RJ-45 ports and 2 Single-
mode fiber ports.
& 2 port @ 100Mbps
6KP8-45-2SLC
6KP8V-
6 Port@ 10/100Mbps
When installed in a Magnum
6K16V Switch, it supports the
standard distances as mentioned
on 5.2.4. and the LEDs also act
similarly.
5.2.11 GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector
The Magnum GBIC-SXSC is a multi-mode Gigabit fiber connector
equipped with SC type connectors and can be easily snapped in and out. The Gigabit
fiber ports are most popular as server-to-switch and switch-to-switch applications. It
supports cable distances up to the IEEE 802.3z standard 1000Mbps distance limits, i.e.,
550m at full duplex.
1@ 1000Mb Fiber SC + 4@10/ 100Mb
The GBIC transceiver has been offered in the modular slot with multiple options as per
the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-
45), whereas the single Gigabit module comes in flavor of G+2 (100Mb fiber ports) or
G+4(10/100 RJ-45 ports) as shown in the above figure.
The GBIC transceiver is fastened using snap-in clips. Insert the transceiver
(take care to insert it the right way up, arrows on top) until it clicks in space. While
1 3 5 7
10/100
L
F/
ACT
TX R XLK
ACT
F/
4
3
2 4 6
LK
2
Single-Mode Fiber port (LC)
ACT
F/H
ACT
F/H
1 3 5
10/10
L
1
AC
F/H
10/100
F/H
2
LINK
10/100
1
FULL/HALF
ACTIVITY
4
3
46
www GarrettCom com
..