GarrettCom 6K32TRC Switch User Manual


 
Magnum 6K32T & 6K32TRC Managed Switch Installation and User Guide(05/07)
iii
www GarrettCom com
..
TABLE OF CONTENTS.......................................................................... Page
1.0
SPECIFICATIONS................................................................................2
1.1
Technical Specifications.......................................................................2
1.2
Ordering Information ...........................................................................5
2.0
INTRODUCTION..................................................................................9
2.1
Inspecting the Package and Product.....................................................9
2.2
Product Description - Magnum 6K32TRC Managed Switch.............10
2.2.1a
Magnum 6K32T Managed Switch Chassis ................................12
2.2.2 Eight-port SFF fiber modules (6K8-MTRJ, 6K8-MLC)..................13
2.2.3 Eight-Port Copper Module, 6K8-RJ45 (MDIX) ............................14
2.2.3a
New PoE(Power Inside), PI6KP8-45RJ (MDIX), 8-port 10/100Mb
.....15
2.2.3b New PoE(Power Pass-through) P6KP8-RJ45 (MDIX) 8-port
.................16
2.2.4
Six-Port “4 + 2”Combo Modules fiber ST or SC.......................16
2.2.5
Four-Port 10 Mb mm Fiber ST Modules.................................17
2.2.6
Gigabit (1000Mbps) port modules .............................................18
2.2.7
Packet Prioritization, 802.1p QOS .............................................19
2.2.8
Frame Buffering and Flow Control............................................19
2.2.9
Managed Network Software 6K32T & 6K32TRC.....................20
2.3
Features and Benefits .........................................................................21
2.4
Applications .......................................................................................22
3.0
INSTALLATION ................................................................................27
3.1
Locating Magnum 6K32T Switches...................................................27
3.2
Connecting Ethernet Media................................................................28
3.2.1
Connecting Fiber Optic ST-type, “twist-lock”...........................28
3.2.2
Connecting Fiber Optic SC-type, "Snap-In" ..............................29
3.2.3
Connecting Single-Mode Fiber Optic ........................................29
3.2.4
Connecting Twisted Pair (RJ-45,CAT3, CAT5)
................................29
3.2.5
Connecting Twisted Pair (CAT-5e or better)
....................................30
3.2.6
Gigabit SFP (Small Form-factor Pluggable) Transceivers.........30
3.2.7
Power Budget Calculations 6K32T & 6K32TRC PM’s
..........................32
3.3
Table-Top or Shelf Mounting.............................................................34
3.3.1 Rack-mounting (for 19” RETMA)6K32T & 6K32TRC’s..........34
3.3.2 Rack-mounting, Reverse version of the Magnum 6K32T’s..............35
3.4
Powering the Magnum 6K32T & 6K32TRC Managed Switch .........36
3.4.1 Alarm Contacts for monitoring internal power Traps....................36
3.5
6K32T & 6K32TRC Port Module (6KPM) Installation.....................37
3.5.1 Preparation for Installing and Removing 6KPMs ............................37
3.5.2
Installing 6KPM Cards in the 6K32T & 6K32TRC...................40
3.5.3
Removing 6KPM Cards .............................................................43
3.6
Connecting the Console Terminal to 6K32T & 6K32TRC................44
3.6.1
RS-232 (DB-9) Console Com port (Serial port) pin...................45
4.0
OPERATION........................................................................................46
4.1
Switching Functionality .....................................................................46
4.2
Status LEDs........................................................................................47
4.3
Auto-Cross (MDIX)Auto-neg for 10/100Mbps RJ-45 ports..............47