Filter
Top Products
Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)
www GarrettCom com
..
The unit can be mounted using the brackets turned outside (normal) or inside (if space is
tight). Attach the mounting bracket either outside or inside as shown in the illustration
above (dotted line shown for the brackets inside). The spacing for the mounting screws
into the supporting wall or panel is a rectangle 11.89” x 7.85” center-to-center.
3.4 Powering the Magnum 6K8-Series Industrial Field Switch
The Magnum 6K8-Series Switches incorporate an internal universal power
supply and have a recessed male IEC connector for the AC power cord at the left rear. A
manual power ON-OFF switch is adjacent. A six-foot 115 VAC 60 Hz standard power
cord is supplied with each unit shipped within the United States and Canada.
The auto-ranging power supply supports installation environments where the
AC voltage is from 90 to 260 volts with a power input frequency between 47 and 63 Hz.
The 16-port units will consume over 20 watts of power typically. When connecting the
34