Filter
Top Products
Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)
Fiber Multi-mode connector types supported:
Fiber Port, ST-type (twist-lock): Fiber multi-mode, 10Mb 10BASE-FL
Fiber Port, MTRJ-type (plug-in): SFF Fiber multi-mode100BASE-FX
Fiber Port, SC-type (snap-in): Fiber optic multi-mode, 100BASE-FX
Fiber Port, ST-type (twist-lock): Fiber optic m.-mode, 100BASE-FX
Fiber Port, 1000BASE-FX, GBIC modules
Fiber Single-mode connector types:
Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX
Fiber Port, LC-type Fiber optic SFF single-mode, 100BASE-FX
Fiber Port, 1000BASE-FX, GBIC modules
LEDs: Per Port (one set at the port, one set on rear top)
LK: Steady ON when media link is operational
ACT: ON with receiver port activity
FDX/HDX: ON = Full-Duplex Mode
OFF = Half-Duplex Mode
100/10: ON = 100Mbps speed
OFF = 10 Mbps
Operating Environment
Ambient Temperature:
-40 to 140 F (-40 to 60C) for UL60950 and Component Parts rating
-60 to 205 F (-50 to 95C) for IEC 60068 Type Test short-term rating
Storage Temperature: -60to 210F (-50to 100C)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13,000 ft. (-60 to 4000m)
Conformal Coating (humidity protection) option: Request quote
Alarm Relay Contacts
One NC indicating internal power, one NC software controllable
Packaging
Enclosure: Rugged High strength sheet metal.
Dimensions: 9.8 in. H x 5.90 in. W x 3.70 in. D
24.9 cm H x 15.0 cm W x 9.4 cm D
Cooling method: Convection, fully –enclosed elongated dual-cavity case
used as heat-sink. designed for vertical mounting, no fans
Weight: 2.1 lbs. (0.95 kg)
Management Console connector
DB-9 for RS-232 “null-modem” cable (sometimes called an X-modem cable)
Power Supply (Internal)
AC Power Connector: IEC-type, male recessed at rear of chassis,
Input Voltage: 100 to 240 VAC (auto-ranging)
Input Frequency: 47 to 63 Hz (auto-ranging)
Power Consumption:
25 watts typical (for a fully loaded fiber model)
15 watts typical (for a 8-port copper only model)
3
www GarrettCom com
..