GarrettCom Magnum 700X Network Router User Manual


 
Magnum 700X Mini-Concentrators Installation and User Guide (05/98)
GARRETT
2
(1.1 Technical Specifications, continued)
Connectors
Seven Magnum PM ports on the front. BPMs are available with BNC, AUI,
FST, and STP connectors. The following are available as RPM configurations.
RJ-45: Shielded, 8-Pin Female (Note:
Shielded 10BASE-T
connectors accept either unshielded or shielded wiring
plugs for standard twisted pair media wiring.)
Fiber Optic: ST (Twist-Lock Connector, for single or multi-mode)
Fiber Optic: SMA (screw-on Connector, for multi-mode, by special order only)
ThinNet: BNC
AUI: D-Sub 15-Pin Female (with slide lock)
DTE: D-Sub 15-Pin Male (with lock posts)
Note: Port Modules are also used with the Magnum 3000X, and as the Bonus Port modules for
Magnum Stackable and Workgroup Hubs. All Port Modules should be installed at the factory
or by trained technicians.
Packaging
Enclosure: High strength sheet metal.
Suitable for wiring closet shelf, wall or desktop mounting.
Port Module Slots: 7
Dimensions: 6.0 in x 10.0 in. x 3.5 in. (15.25 cm x 25.4 cm x 8.89 cm)
Weight: 2.5 lb. (1.1 Kg)
Port Slot Cut-out: 2.2 in. x .75 in. (5.6 cm x 1.9 cm)
Cooling method: Convection
LED Indicators on Chassis
Four chassis LEDs monitor the general status of the unit including
network traffic.
PWR
- Power, Green LED, steady ON indicates there is AC power.
RX
- Receive, Green LED, blinks to indicate network activity, data
being received from any of the PMs.
JAB
- Jabber, Amber LED, illuminates when jabber condition (illegal
packet size) is detected on any port; affected port is partitioned
temporarily until jabber stops.
COL
- Collision, Yellow LED, flashes when a collision is detected
on any of the PMs.
For the LEDs on each PM, see "Product Description" of the PMs.
Agency Approvals
UL Listed (UL 1950), cUL, CE
Emissions: meets FCC Part 15, Class A
Warranty
Three years, return to factory Made in USA