GarrettCom Magnum 700X Network Router User Manual


 
Magnum 700X Mini-Concentrators Installation and User Guide (05/98)
GARRETT
4
1.4 Ordering Information
Magnum 700X Mini-Concentrator
Magnum 700X Base chassis with 7 slots for RPMs and BPMs, power supply
Magnum 700X-Br Multi-Bridge chassis with one RJ-45 RPM for the common port, and 6
slots for BPMs and other RPMs, power supply. Includes 5 face plates.
Magnum RPM-BNC Repeater Module with 1 BNC connector, internal termination switch
Magnum RPM-TP Repeater Module w/ 1 shielded female RJ-45 connector + up-link
switch
Magnum RPM-AUI Repeater Module with 1 AUI (DB-15 female) connector, with slide
lock
Magnum RPM-DTE Repeater Module with 1 DTE (DB-15 male) connector, with lock
posts
Magnum RPM-FST Repeater Module w/ mm* Fiber ST “twist” 10BASE-FL dual
connector
Magnum RPM-SMF Repeater Module w/ single mode Fiber connector
Magnum RPM-FSM** Repeater Module w/ mm* Fiber SMA “screw-on” 10BASE-FL
connector
Magnum BPM-BNC Local Bridge Module with 1 BNC connector
Magnum BPM-AUI Local Bridge Module with 1 AUI connector
Magnum BPM-FST Local Bridge Module with mm* Fiber ST connector
Magnum BPM-TP Local Bridge Module with 1 RJ-45 connector + up-link switch
Magnum PM-FP Face Plate - cover for unused slots
NOTE:
All RPMs and BPMs have LEDs for status information. Refer to Product Description for
details.
* mm = multi-mode
** This item is available by special order only.
Note:
All PMs are interchangeable for use with the Magnum 3000X Stackable
Concentrators and Magnum 3000 Stackable Hubs bonus ports, and the Magnum 1000
Workgroup Hubs bonus ports. The same PMs are also used in the Magnum 30X
Workgroup Bridges and the Magnum 200X and 20X Two-port Repeaters.
Garrett Communications reserves the right to change specifications, performance
characteristics and/or model offerings without notice.