Filter
Top Products
32 Gateway ALR 9000 User’s Guide
ID Setup
To establish communication between the LCD and host IFM, the LCD
must maintain an ID number that matches the ID number on the system
board. The ID numbers are displayed in the ID SETUP submenu (see) as
follows:
• ID Selected displays the LCD ID number.
• ID Available displays the ID number on the system board.
In the event these ID numbers do not match, communication will cease.
You must restore communication by performing the following:
1. Press the Reload ID button to automatically reload an LCD ID
number that matches the current ID number on the system board.
2. Press the Save Setup button which will display a submenu. Then,
press the Accept button to confirm the change you just made.
If you need to change the ID number on the system board, you must do so
through the BIOS Setup Program.
USRGUIDE.BOO Page 32 Thursday, July 16, 1998 10:41 AM