Filter
Top Products
36 Gateway ALR 9000 User’s Guide
Handy Checklists
If your system does not operate correctly, re-read the instructions for the
procedure(s) you have performed. If an error occurs within an application,
consult the documentation supplied with the software.
If the suggestions in this section are not helpful, try the Technical Support
department.
The following checks should be performed in the event of a problem. If
these checks do not help solve the problem, consult Technical Support.
Looking Things Over
Sometimes, the simplest things can cause trouble. Before powering up the
system, perform the following checks:
1. Is the power cord connected to the PC and an AC outlet?
2. Is the AC outlet supplying power?
3. If a power strip is used, is it switched on?
4. Are the voltage selection switches on the power supply set for the
proper voltage (115V or 230V)?
Verifying Your Configuration
If your system is not operating correctly, the BIOS may contain an invalid
configuration parameter. Enter the BIOS program and check your
configuration settings. For detailed information regarding the BIOS
program, refer to BIOS Setup section in your Technical Reference manual.
Important!
DO NOT, under any
circumstances, return any
equipment without first
obtaining a Return Material
Authorization (RMA) number
from Technical Support.
USRGUIDE.BOO Page 36 Thursday, July 16, 1998 10:41 AM