Filter
Top Products
www.gateway.com
27
Closing the server case
To close the server case:
1 Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
2 Place the front top cover on the server, then slide it forward until it clicks into place.
3 Place the back top cover on the server, then slide it forward (1) until it clicks into place.
Replace the screw (2) to hold the top cover in place.
4 Reconnect the power cords and all other cables.
Important
The hard drive carriers shown in these illustrations may look different than
the actual hard drive carriers in your server.