Using Your Gateway Flat-Panel Monitor
4
5 Connect other video sources (such as a DVD player, video camera, or receiver) to the
appropriate video jacks on the back of the monitor.
Setting up the optional speaker bar
An optional speaker bar is available for mounting underneath your monitor. In the United States,
you can order a speaker bar from www.gateway.com.
To install the speaker bar:
1 Turn off the monitor.
2 Tilt the screen back, then match the mounting clips on each side of the speaker bar with
the mounting slots underneath the monitor.
3 Slide the speaker bar forward onto the bottom of your monitor until it snaps into place. Make
sure that it is secure by pulling it downward.
Important
If you connect the speaker bar to the monitor while the monitor is turned on,
the speaker bar will not initialize and will not work correctly. If this happens, turn
the monitor off, then back on to enable the speaker bar.
VGA portDVI portHDMI port
Mounting clip
Mounting slot