Filter
Top Products
244
Chapter 15: Upgrading Your Notebook
www.gateway.com
To add or replace memory modules:
1 Follow the instructions under “Preventing static electricity discharge” on
page 242.
2 Turn off your notebook and disconnect the AC adapter and modem and
network cables.
3 Turn your notebook over so the bottom is facing up.
4 Remove the battery. For more information, see “Replacing the battery” on
page 153.
5 Loosen the memory bay cover screw, then remove the memory bay cover.
6 If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.