Gateway S466 Computer Hardware User Manual


 
ADAC Ultra2 S466 Hardware Guide
xii
Preface, Continued
Disclaimer This manual describes the operation of the Gateway ADAC
Ultra2 S466 Disk Array Controller. Although efforts have been
made to assure the accuracy of the information contained here,
Gateway expressly disclaims liability for any error in this
information, and for damages, whether direct, indirect, special,
exemplary, consequential or otherwise, that may result from such
error, including but not limited to the loss of profits resulting
from the use or misuse of the manual or information contained
therein (even if Gateway has been advised of the possibility of
such damages). Any questions or comments regarding this
document or its contents should be addressed to Gateway at the
address shown on the cover.
Gateway provides this publication “as is” without warranty of
any kind, either expressed or implied, including, but not limited
to, the implied warranties of merchantability or fitness for a
specific purpose.
Some states do not allow disclaimer of express or implied
warranties or the limitation or exclusion of liability for indirect,
special, exemplary, incidental or consequential damages in
certain transactions; therefore, this statement may not apply to
you. Also, you may have other rights which vary from
jurisdiction to jurisdiction.
This publication could include technical inaccuracies or
typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new
editions of the publication. Gateway may make improvements
and/or revisions in the product(s) and/or the program(s)
described in this publication at any time.
Requests for technical information about Gateway products
should be made to your Gateway representative.