Filter
Top Products
ADAC Ultra2 S466 Hardware Guide
74
Problem Suggested Solution
Firmware Initializing...
appears and remains on the screen.
Make sure that TERMPWR is being properly
provided to each peripheral device populated
channel.
Make sure that each end of the channel chain
is properly terminated using the recommended
terminator type for the peripheral device. The
channel is automatically terminated at the
ADAC Ultra2 S466 card if only one cable is
connected to a channel.
Make sure (on a channel basis) only two type
of cables are connected at any one time.
If using an FPM SIMM, make sure the RAS
Access Time parameter is 70 ns.
Make sure that the ADAC Ultra2 S466
controller is properly seated in the PCI slot.
What SCSI IDs can a non-hard disk
device have and what is maximum
number allowed per adapter?
Non-hard disk devices can only accommodate
SCSI IDs 1, 2, 3, 4, 5 or 6, regardless of the
channel used. A maximum of six non-hard
disk devices are supported per ADAC Ultra2
S466 adapter.
Why does a failed logical array still
get a drive assignment?
To maintain the DOS Path statement integrity.