Filter
Top Products
GBC 620os Operation Manual
© 2007 General Binding Corporation Page 11
FEATURES/ACCESORIES GUIDE
V
Y
X
W
Figure 9
Z
A1
Figure 10
B1
C1
D1
E1
Figure 11
NOMENCLATURE PLATE
(Fig. 9– Item V)
The Nomenclature Plate provides the operator the
necessary Technical information such as Voltage,
Amperage, Wattage, Model Number and Serial Number.
MAIN ON/OFF SWITCH
(Fig. 9– Item W)
The Main On/Off Switch supplies power or removes
power from the machine.
FUSES
(Fig. 9– Item X)
The Fuses protect internal PCB’s and motors.
POWER CORD
(Fig. 9– Item Y)
The Power Cord plugs into the Main Power source or
outlet. See (Machine Specs for plug requirements.)
LOCKING PINS
(Fig10– Item Z)
The Locking Pins secure the Film Shaft Latch.
FILM SHAFT LATCH
(Fig. 10– Item A1)
The Film Shaft Latch secures the Supply shaft ensuring
that the film is supported and enters the nip accurately.
PRELAMINATING FILM PERFEORATOR WHEEL
(Fig. 11– Item B1)
The Prelaminating Film Perforator Wheel pierces small
holes into the film to ensure controlled snapping or
separating of images.
FILM CORE CHUCKS
(Fig. 11– Item C1)
The Film Core Chucks secure the film onto the Supply
Shaft.
FILM SUPPLY SHAFT
(Fig. 11– Item D1)
The Film Supply Shaft accepts a 3 inch Core Chuck. The
two Core Chucks slide onto the Film Supply Shaft,
supporting the film being used. The Film Supply Shaft
has a ruler adhered to the shaft for ease and accuracy when
aligning the film and medias.
TOP FILM IDLER
(Fig. 11– Item E1)
The Top Film Idler guides the film through the nip giving
the film adequate film dwell time.