Filter
Top Products
Page 5 - 14
Operations
© GBC Films Group June 2000
Orca 80-99 Operation and Maintenance Manual
PROCESS CONTROL CHART 2-3
Process: Hot Mount and Laminate, One Pass
Materials (top/bottom): / 3/16" thick Hot tissue board
Front Control Panel
Adjustments
Rear Control Panel
Adjustments
Top Brake ON / 20 p.s.i. Top Heat ON / 245
o
F (118
o
C)
Top Clutch OFF / NA Bottom Heat OFF / NA
Laminator Roller ON / 40 p.s.i. Top Cooling Fans OFF
Bottom Brake (front) OFF / NA Bottom Cooling Fans OFF
Bottom Clutch (front) OFF / NA Pull Roller Clutch OFF / NA
Forward/Reverse FORWARD Pull Roller Pressure OFF / NA
Speed 2 - 3 f.p.m. Bottom Brake (rear) OFF / NA
Laminator Roller Shims 3/16" Bottom Clutch (rear) OFF / NA
Pull Roller Shims NA
Helpful Hints/Notes:
Start the overlaminate with a leader board the same thickness as the board being mounted to.
While maintaining paper tension, lay the image to be mounted on the board and follow the leader
board into the nip.