Filter
Top Products
Page 5 - 18
Operations
© GBC Films Group June 2000
Orca 80-99 Operation and Maintenance Manual
PROCESS CONTROL CHART 2-5
Process: Hot Overlaminate with Pressure Sensitive Mount Adhesive
Materials (top/bottom): 3 mil Gloss / Mount Adhesive
Front Control Panel
Adjustments
Rear Control Panel
Adjustments
Top Brake ON / 20 p.s.i. Top Heat ON / 230
o
F (110
o
C)
Top Clutch OFF / NA Bottom Heat OFF / NA
Laminator Roller ON / 60 p.s.i. Top Cooling Fans OFF
Bottom Brake (front) ON / 20 p.s.i. Bottom Cooling Fans OFF
Bottom Clutch (front) OFF / NA Pull Roller Clutch ON / 80 p.s.i.
Forward/Reverse FORWARD Pull Roller Pressure ON / 60 p.s.i.
Speed 4 - 6 f.p.m. Bottom Brake (rear) OFF / NA
Laminator Roller Shims 0 Bottom Clutch (rear) OFF / NA
Pull Roller Shims 0
Helpful Hints/Notes:
The encapsulated image will have waves running 90 degrees to the feed of the film. This is due
to the moisture in the mount adhesive’s release liner. Once mounted the waves disappear.