Filter
Top Products
1-4 VersaMax Serial to Ethernet Adapter User's Manual – July 2000 GFK-1852
1
Figure 1-2. Results of the Ping Command
B. Type
arp -a
(make sure you leave a space between arp and –a) at the MS-DOS
prompt, then press the Enter key. You should see at least one entry in the ARP
table, as shown in the next figure:
Figure 1-3. Results of the arp –a Command
If the response is “No arp entries found,” repeat steps A. and B. to ping other
devices until the
arp -a
command lists one or more devices
. Note that the ARP
table entries will be removed automatically after several minutes, so if you
ARP Table