Filter
Top Products
4-12
•
••
•
Chapter 4 Wizards Innovation Series Medium Voltage GP Type - G Drives GEH-6385
Drive Commissioning: AC Source Selection
The frequency selection is used to calibrate the input line monitor. Use the frequency
of the AC line input to this Innovation Series Drive. The choices are usually either
50 or 60 Hertz.
Dynamic braking (DB) is an option in some drives. If your drive has been provided
with this equipment configure it for operation. DB absorbs energy from the load in
applications where fast deceleration is required.
Related elementaries
• Innovation Series MV Type G drive data sheet (1AC)
Drive Commissioning: Motor Nameplate Data
The motor nameplate contains the basic information for the motor. The drive is
capable of operating the motor efficiently based on the nameplate data.
Two consecutive Drive Commissioning wizard pages ask for motor nameplate data.
Enter values for the following parameters based on the nameplate information:
• Motor rated voltage
• Motor rated freq
• Motor rated current
• Motor rated rpm
• Motor rated power
• Motor efficiency
• Motor service factor
Related functions
• Primary Motor & Application Data
• Motor efficiency
• Motor service factor