Filter
Top Products
GEH-6385 Reference and Troubleshooting, 2300 V Drives Chapter 3 Paramters/Functions
•
••
•
3-29
Three different unit systems are available:
• Imperial (English)
• Metric (SI)
• Native (Platform)
If Display units is set to Native (Platform), then values are displayed in the same
units that the internal control uses. The following table specifies some of the unit
system differences.
Display units Length Power Torque Flux
Imperial
(English)
Feet Horsepower Foot-pounds Volts/hertz
Metric (SI) Meters Kilowatts Newton-meters Volts/hertz
Native (Platform) Meters Watts Newton-meters Webers
Language Display
As long as the keypad has been configured correctly, the DDI can display its menu
and status information in an alternate language.
Note Presently this function is not yet operational.
Function configuration
Parameter Description
Language Selects the language in which to display all information in the DDI.
Possible selections are:
English - Displays DDI text in English.
Native - Displays DDI text in the native language that is specified
when DDI Menus are downloaded from the toolbox (see below).
Function description
To display the DDI text in a non-English language, the user must first download the
appropriate DDI Menus. The user can perform this operation from the toolbox by
selecting from the menu bar: Device > Download > DDI Menus.
The user will then be prompted to select an alternate language to download to the
DDI.