Filter
Top Products
page | 30
USB under Unicast Mode
When connecting USB devices to the DVI KVM over IP, the functionality is similar to that
of video and RS-232.
As an example, we will start with our original diagram and connect a computer to Sender
unit S2 and a keyboard and mouse device to Receiver unit R2. This will allow us to control
the computer from the Receiver unit.
Figure 2.9 - Using USB devices under unicast mode.
1. Make sure the desired Sender and Receiver units are set to unicast mode. Refer to
Conguring Unicast Mode if necessary.
2. Access the Web interface for the Sender unit.
3. Click the Functions tab.
LAN
Receiver unit
Receiver unit
DVI Out
USB cable
Computer
DVI Out
Sender unit
Sender unit
Sender unit
DVI In
DVI In
DVI In
07
07
02
05
09
R
1
S
1
S
2
S
3
R
2
Operating the DVI KVM over IP
USB Control
NOTE: By default, the DVI KVM over IP Sender and Receiver units
are shipped in unicast mode.