Filter
Top Products
page | 47
Chapter
Page Title
page | 47
Appendix
Upgrading the Firmware
17 Channels or Less
The following items are required to upgrade the rmware to a limited number of channels:
• Gefen DVI KVM over IP
• Computer (Mac or PC)
• Firmware les
1. Download the rmware for the DVI KVM over IP from the Gefen Web site.
2. Extract the rmware les from the .ZIP le. The .ZIP le contains two les:
► webfwc_131d-ch00XX
XX denotes the number of maximum channels
3. Access the Web interface by entering the IP address of the Receiver unit. Refer to
Displaying the IP Address if necessary.
4. Under the System tab, click the Update Firmware frame.
5. Click the Browse... button and select the number of channels needed.
6. Click the Update button.
7. After a few moments, the Web interface will indicate that the upgrade process has
been started.