Filter
Top Products
8
How to Connect the Home Theater Audio Processor
1. Connect an HDMI source device to the HDMI input port of the Home Theater
Audio Processor using the included HDMI cable.
2. Optionally, connect an additional audio source to the coaxial (S/PDIF) input
using a user supplied coaxial cable.
3. Connect up to 6 speakers to the speaker terminals on the back panel of
the Home Theater Audio Processor. The following connection terminals are
available:
• Front Left
• Front Left (for bi-amping)
• Front RIght
• Front Right (for bi-amping)
• Center
• Left Surround
• Right Surround
4. Connect the Digital Audio Decoder to an amplifi er using the RCA connectors
on the rear panel. The following RCA connectors are available:
• Front Left
• Front Left (for bi-amping)
• Front RIght
• Front Right (for bi-amping)
• Center
• Left Surround
• Right Surround
• Subwoofer
5. Connect up to two HDMI output devices to the HDMI outputs using user
supplied HDMI cables. If only using a single HDMI device, connect this
device to the HDMI Output 1 port. These outputs will be mirrored.
6. Optionally, audio can also be output using the coaxial (S/PDIF) and optical
(TOSLINK) connectors. These outputs will not have any processing applied
to them.
7. External control can be accomplished using the RS-232 serial
communications port. More information on the use of this connector can be
found on page 23.
8. Connect the included 24V DC power supply to the power receptacle on the
Home Theater Audio Processor. Connect the wall plug into an empty wall
power socket.
CONNECTING THE
HOME THEATER AUDIO PROCESSOR