Filter
Top Products
19
When fi nished, press the ▼ or ▲ to move to another selection. Alternately, the
user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu
System, press the MENU button.
MISCELLANEOUS SETUP
This menu option will allow the user to set miscellaneous settings. The following
options are in the menu:
• DIST. UNIT - This will set the unit of measurement when using the
Speaker Distance option. The user can use either Feet or Meters as the
measurement unit (default is METER).
• EDID ADJ. - This will control the location and type of EDID which will be
used to send to the HDMI source device. The following options are available:
• INT - This option will use an internal EDID which will list all of the
supported audio and video formats that can be used with the Home
Theater Audio Processor.
• EXT - This option will use the EDID from the HDMI device connected to
HDMI output 1.
• MIX - This option will take video capabilities form the EDID of the
display connected to the display on HDMI input 1 and the audio
capabilities from the EDID of the Home Theater Audio Processor (this is
the default mode).
• IR CHANNEL - This will set the IR channel that is used with the included
remote control. This setting must correspond with the setting on the IR
remote control. Please see page 11 for information on setting the IR channel
on the remote control.
• 1 - The unit will use IR channel 1 (this is the default setting)
• 2 - The unit will use IR channel 2
• 3 - The unit will use IR channel 3
• 4 - The unit will use IR channel 4
• DEFAULT - This will return the Home Theater Audio Processor to its factory
default settings.
Use the ▼ and ▲ buttons on the front panel to select the desired option.
Use the ◄ and ► buttons on the front panel to change the setting or the selected
option.
When fi nished, press the ▼ or ▲ to move to another selection. Alternately, the
user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu
System, press the MENU button.
OPERATING THE HOME THEATER AUDIO PROCESSOR