Filter
Top Products
24
RS-232 COMMANDS
RS-232 Command Table
Command Code Response Description
POWER 0 > POWER OFF POWER OFF
POWER 1 > POWER ON POWER ON
VOL +10~-60 > VOL +10~-60
Audio volume adjust from maximum to
minimum
VOL + > VOL +10~-60 Increase audio by 1
VOL - > VOL +10~-60 Decrease audio by 1
MODE 0 > PL II
Audio FAV PROC setup to Dolby Pro Logic
II mode
MODE 1 > DIRECT
Audio FAV PROC setup to DIRECT mode
[Default:DIRECT]
MODE 2 > STEREO Audio FAV PROC setup to STEREO mode
MODE 3 > MCH Audio FAV PROC setup to MCH mode
MODE 4 > MONO Audio FAV PROC setup to MONO mode
ENHA 0 > ENHA NIGHT+ Audio ENHANCE effect NIGHT+
ENHA 1 > ENHA VOICE+ Audio ENHANCE effect VOICE+
ENHA 2 > ENHA VOLUME+ Audio ENHANCE effect VOLUME+
ENHA 3 > ENHA OFF Audio ENHANCE effect OFF [Default:OFF]
TESTN 0 > NOISE FL
Generate pink noise for adjusting the Front
Left speaker Audio volume
TESTN 1 > NOISE CT
Generate pink noise for adjusting the
Center speaker Audio volume
TESTN 2 > NOISE FR
Generate pink noise for adjusting the Front
Right speaker Audio volume
TESTN 3 > NOISE SR
Generate pink noise for adjusting the
Surround Right speaker Audio volume
TESTN 4 > NOISE SL
Generate pink noise for adjusting the
Surround Left speaker Audio volume
TESTN 5 > NOISE SUB
Generate pink noise for adjusting the
Subwoofer speaker Audio volume
MUTE 0 > MUTE OFF Audio MUTE OFF [Default:OFF]
MUTE 1 > MUTE ON Audio MUTE ON
INPUT 0 > INPUT SPDIF Audio input switch to SPDIF mode
INPUT 1 > INPUT HDMI Audio input switch to HDMI mode
FIRMWARE ? > FIRMWARE 1.XX Show fi rmware version format is 1.XX