Filter
Top Products
6
PANEL DESCRIPTIONS
9 Mode / OK Button
This button will change the Processing Mode when not in the Menu System.
While in the Menu System this will be used as a confi rmation button.
10 Exit Button
This button is used to exit the current menu level and return to the previous/
parent level. This button will exit the entire Menu System when on the top most
level.
11 Power Button
This button will toggle between the ON and STANDBY power states. An LED
status indicator will signify the current power state. A RED LED will be active
when the unit is in Standby power state. A GREEN LED will be active when the
unit is in the ON power state.
12 Front Right and Front Left Speaker Terminals
These are 5-way binding post type terminals. They will accept spade lug,
banana plug, dual banana plug, bare wire, and pin style connections. 4 pairs of
positive and negative terminals are available. 2 pairs are for front right and front
left speakers. An additional 2 pairs are also available for bi-amping the front right
and front left speakers.
13 Center, Surround Right, and Surround Left Speaker Terminals
These are 5-way binding post type terminals. They will accept spade lug,
banana plug, dual banana plug, bare wire, and pin style connections. 3 pairs of
positive and negative terminals are available. 2 each for the center, surround
right, and surround left speakers.
14 RS-232 Serial Communications Port
This port is used to control functions and features using serial communications.
For more information on this feature please see page 23.
15 Analog Audio RCA Outputs
8 RCA type audio outputs are available for connection to a separate amplifi er.
Up to 6 discrete channels can be utilized. 2 RCA audio output connectors are
available for front channel bi-amping purposes. Please see page 22 for more
information.
16 Coaxial (S/PDIF) Audio Output
This output is constantly active. Audio that is extracted from the input HDMI
source device or via the coaxial input is directly output through this connector.
Processing and features of the Home Theater Audio Processor are not applied
to the audio passing through this connector.