Filter
Top Products
Maintenance
24 313872N
Maintenance
Supplied Tool Kit
See Parts on page 40 for tool illustrations.
• Hex Nut Driver; 5/16
• Screwdriver; 1/8 blade
• Impingement Port Drill Bit; various sizes depending
on port size
• 117661 Pin Vise; dual reversible chucks,
see F
IG. 14
• 117773 Fusion
®
grease
• 117792 Grease Gun
• 100633 Allen Wrench; 5/32
Lubrication
See Accessories on page 53 to order lubricant. Liber-
ally lubricate all o-rings, seals, and threads.
Grease the Gun
1. Perform pressure relief procedure. See Pressure
Relief Procedure on page 22.
2. Perform short term shutdown procedure. See Short
Term Shutdown on page 23.
3. Use a 5/32 in. allen key to remove the weep plug.
Procedure Schedule
Grease the Gun, page 24 Daily
Replace Mix Chamber and Front
Seal, see page 29
Every 2-4
Weeks
Clean Check Valves, page 27 Monthly
Clean Outside of Gun, page 26 As Needed
Clean Breather Plug, page 26 As Needed
Clean Fluid Manifold, page 26 As Needed
Clean Fluid Housing Passages,
page 28
As Needed
Clean Orifice, page 29 As Needed
F
IG. 14: Pin Vise
Reversible
Reversible
TI3684a
NOTICE
Use only Throat Seal Liquid on the o-rings, seals,
and threads of the cartridge. Fusion grease or
other petroleum-based or vegetable-based lubri-
cants will cause cartridge o-rings and seals to swell
and stick.
ti19565a