G-Technology 0G01868 Server User Manual


 
G-SPEED Product Guide
Pa
g
e 10
8.2 (SCSI) Configuring G-SPEED SCSI ID
To set the SCSI ID of G-SPEED select “Modify Volume Set”
on the left NAV bar under “Volume Set Functions.” On the
next page select the volume you wish to set the SCSI ID.
Click the “submit” button and the following screen will
appear:
Select the SCSI ID you would like to assign. Check the
“Confirm the Operation” box and click “Submit” to save the
changes. The G-SPEED and will need to be restarted for the
changes to take effect.
8.3 Initializing G-SPEED
Note: If the G-SPEED is currently configured with a RAID Set.
You must delete the RAID Set before continuing. See Section 8.4
for instructions on deleting a RAID Set.
1. To create a RAID/Volume set on the G-RAID select “Quick
Create” under “Function Menu” on the left navigation bar of
the G-SPEED GUI. The following screen will appear:
2. Select the RAID level you’d like to use with G-SPEED.
Note: For video applications in protected mode we recommend using
RAID 3. For maximum performance and capacity we recommend RAID 0.
See Appendix A for details on other RAID levels supported
Note: G-SPEED with capacities over 2TB require special
initialization covered next in Item 3. Skip to Item 4 if your
G-SPEED is less than 2TB.