Filter
Top Products
G-SPEED Product Guide
Pa
g
e 9
8. MANUAL CONFIGURATION
This section will describe how to manually configure
G-SPEED using the web GUI. The G-SPEED employs a very
sophisticated controller with many advanced options. Some
of these options can erase data on the G-SPEED, so be
careful and backup your data if the G-SPEED has been in
use. These operations are identical on MAC and Windows
systems.
8.1 Connecting to the G-SPEED GUI
1. Connect the G-SPEED to your computer or network by
connecting an Ethernet cable from the Ethernet port on the
G-SPEED to your host computer or network.
2. G-SPEED will auto configure to your network or direct
attached computer and display the IP address of the
G-SPEED on the LCD panel.
3. Enter this IP address into a web browser to connect to
the G-SPEED GUI. When the login prompt appears type the
default username “admin” and password “0000”.
Note: See section 10.4 to customize the login username / password
4. After entering the correct username and password the
G-SPEED GUI will appear. There are many advanced
features accessible through the GUI that are not covered in
this manual. Consult your Dealer for more information.