13
Figure 6: Inserting the Slide original holder.
Position the Slide holder on the two supports extending from the
front of the Slide Feeder and slide the holder into the scanner. A
magnet inside the scanner will grab the holder. Gently press the
holder into the scanner to make sure it is fully inserted. Do not force
it.
Go back to your computer and click on Done in the Mount feeder
window. e scanner draws the holder inside and sets the drum in the
“parked” position. You then return to the Feeder window, in which
the Drum position and Feeder position menus are now active.
16.
17.