26
Click on the Batch Scan button to open the Batch Scan window.
If it is not already shown, expand the Feeder heading in the Batch
Scan window by clicking on the triangle next to the heading.
Set the Position eld to the slide number you wish to scan. You can
enter the number directly using your keyboard, or select it by clicking
on the up and down buttons next to the eld.
In the main FlexColor window, make sure that the auto-focus button
(labeled AF) is enabled. You must always enable auto-focus when
scanning slides because mountings can vary in thickness and each
slide may sit slightly dierently in its mounting.
Click on Preview in the main FlexColor window. e scanner then
advances the Feeder to your selected slide and makes a preview.
Make image settings, such as rotation, crop, corrections and output
size, using the various FlexColor tools as described in the FlexColor
User’s Guide.
Either make a nal scan now by clicking on Scan in the main
FlexColor window or add the image to the Manual list in the Batch
Scan window by clicking on the Add button there (this enables you
to set up several scans based on their previews and then scan them all
at once later).
1.
2.
3.
4.
5.
6.
7.