Hasselblad 949 Scanner User Manual


 
23
Instead of using the standard preview/scan workow in FlexColor,
click on the 3f button to open the Scan 3f window.
Make the various 3f settings as described in the FlexColor User’s
Guide. Note the following:
Use the Destination setting to select a parent folder in which to
save your 3f les. If you would like to create a new sub-folder for
each batch, mark the Add job folder check box; then, each time
you begin a new 3f batch scan, FlexColor will create a new sub-
folder below the Destination folder and save the new scans there.
Either way, the contents of the most recently used folder will be
displayed in the FlexColor Thumbnails window immediately aer
the batch is nished.
All images will have a name based on the value entered in the
Image Name eld, plus a unique number.
Usually, it is easiest use the Crop settings to automatically remove
the parts of the scan that are covered by the slide mounting.
If you have both negative and positive originals in your batch,
you should set the Film Type to “Auto Detection”. is will cause
3.
4.