Hawking Technology HWPS1UG Network Card User Manual


 
10.3 Get Setting Values get Command
The “get command is used to get the setting values of this
print server. The format of the “get command is as follows :
get argument
The argument value will then be displayed after the command.
For example, if I want to get the IP address of the print server,
I type in the get ip command and the IP value
IP_ADDR=192.168.1.250’” is displayed:
admin# get ip
IP_ADDR=192.168.1.250
If you enter get only, the system will list all available
arguments of get command.
The following table lists all the arguments whose value can be
obtained by the get command:
Argument Description Example
psname Print server name admin# get psname
PORT1_PS=PS2548
96
password Login password admin# get password