Filter
Top Products
5.2 NetWare 3.x/4.x/5.x Installation & Setup
Once your print server is connected to your Ethernet network,
you can set it up for use with your networking software
5.2.1 Installation Using PSETUP
5.2.1.1 Configuring in Print Server Mode
For more complex setup needs, you can use the PSETUP
program in conjunction with the NetWare PCONSOLE program.
The installation procedure is as follows:
1. From a workstation, log in to your NetWare server as
SUPERVISOR.
2. Run the PSETUP program included on the CD-ROM. ( Ex.
e:\dosutil\psetup.exe )
3. Select your new print server from the list provided.
4. Choose NetWare Configuration from the menu.