Filter
Top Products
4.2 Windows NT/2000 Server Installation and
Setup
Please follow the procedures described below for installation
of a peer-to-peer connection (PTPP) between a Windows
NT/2000 Server and the HWPS1UG.
Step1.
If this is your first time installing the print server, please
install the administrator software on your Windows NT/2000
server first. Refer to section 3.2 for installation instructions.
If your network has already an installed working print server
and your Windows NT/2000 server has not yet installed the
PTPP driver, please install the client software. Refer to section
3.4 and 3.5 for installation instructions.
Step2.
Please add/configure Peer-to-Peer Printing on your Windows
NT/2000 network printer and verify that you can print from
Windows NT/2000 to the print server through the installed
PTPP driver.