Filter
Top Products
Error Indications
Problem
Pages have toner stains or
smudging
Toner insufficientlv adheres
to or easily comes off paper
when you are printing thick
or special paper.
Vertical lines appear in
solid black printing, stains
appear in the back of a
page, or paper is wrinkled
or curled.
Solutions
If this problem occurs after a paper
jam, print several pages.
Clean the paper path.
Clean the paper guide before the
corona wire.
Clean the corona wire.
Replace the cleaner pad.
If the fuser unit is damaged,
contact your dealer.
Turn the thick paper mode on
using the control panel.
Check if the thick paper mode is
on by using the control panel; if
the mode is on, turn it off.
Error Indications
I
Errors refer to a problem or condition which requires you to take
action. The printer shows errors by using the ERROR indicator and
the message display of the control panel. The following table lists the
error indications, explains causes, and suggests solutions.
Message
Causes and solutions
BD CYCLE ERROR
Cause:
Malfunction in the laser unit
Solution:
If the error recurs, consult
your dealer for service.
COMM.ERROR
Cause:
Communication error
Solution:
Press the button and
select the correct settings of the serial
interface using the control panel setup
mode.
User’s Manual
5-13