Filter
Top Products
Setting Up
loading Paper and Installing the Paper Tray
This printer has a single paper tray that is preset for letter size (8.5 x
11.0 inches) paper for U.S. customers and to A4 size (210 x 297
mm) paper for European customers. (You can adjust the paper tray
to a different size paper. See Chapter 2. You can purchase an
optional paper tray. See Chapter 3 and Appendix B.) You should
load about 50 sheets of copier paper to test the printer.
1.
2.
3.
4.
Pull the paper tray out of
the printer.
Prepare the paper tray.
Remove restraint card board
1
and tapes securing the
rear paper guide. Check
green indicator
2
is
positioned according to the
tray size label (*).
Lock the pressure plate.
If
the front of the pressure
plate is raised, push it down
until the pressure plate
clicks into place.
Widen the side guides.
While bending both side
guides inward
1,
push
their inner PUSH marks
outward
2.
1-10
User’s Manual