HP (Hewlett-Packard) 16V Printer User Manual


 
Installing a Printer Driver
Installing a
Printer Driver
Now that you connected your printer to the parallel port of the
computer, you are ready to install a Windows printer driver into
your computer. The Windows printer driver is essential for
controlling your printer in Microsoft Windows environments.
Several printer drivers are contained in the attached software set
consisting of a CD-ROM and a floppy disk.
Printer drivers in the CD-ROM are:
l
Standard drivers for Windows 3.1/3.11
l
FPS drivers for Windows 3.1/3.11
l
Standard drivers for Windows 95
l
FPS drivers for Windows 95
l
Standard driver for Windows NT 3.51
l
FPS driver for Windows NT 3.51
l
Standard driver for Windows NT 4.0
l
FPS driver for Windows NT 4.0
Printer drivers in the floppy disk are:
l
Standard drivers for Windows 3.1/3.11
l
Standard drivers for Windows 95
Standard drivers are to be installed when your printer is used as a
PCL printer and FPS
d
rivers
are to be installed when your printer is
used as a PostScript printer.
When you are using Windows 95 or Windows NT 4.0, it is
recommended that you should install a printer driver using
MarkVision
because the printer driver is reinforced with
MarkVision
features such as remotely changing settings of a
network printer and checking status of a network printer. For
MarkVision,
see the next section.
To install a printer driver in Windows 95, note the following:
l
When you install the printer driver, the original OS (CD-ROM or
floppy disks) is required during installation.
l
When MarkVision
for Windows 95 may be already installed,
select a printer name followed by (MV) in the Printers window.
When MarkVision
is not installed, select a printer name not
followed by (MV).
1-22
User´s Manual