Filter
Top Products
Error Indications
Message
Causes and solutions
COVER OPEN 1
Cause:
Incomplete closing of upper door
Solution:
Close the upper door.
Note: See caution following in this table.
Cause:
Incomplete locking of paper guide
inside the rear stacker
Solution:
Lock the paper guide.
Note: See caution following in this table.
Cause:
Incomplete closing of rear unit of
the optional duplex unit
Solution:
Close the rear unit of the duplex
unit.
COVER OPEN 2
COVER OPEN 3
FUSER FAILURE
INVALID SIMM
JOB TIMEOUT
LOAD MFF size
LOAD TRAYn size
MANUAL TIMEOUT
MEMORY OVER FLOW
MFF NOT INSTALL
Cause:
Malfunction in the fuser unit
Solution:
If the error recurs, consult your
dealer for service.
Cause:
Incorrect SIMM card installed
Solution:
Press the button.
Cause:
FPS job timeout (This error occurs
when the FPS emulation is active.)
Solution:
Press the button.
Cause:
Paper mismatch occurred.
Solution:
Set the specified tray to the
correct paper size specified.
Cause:
Paper was not inserted into the
manual feed slot in the prescribed time.
(This error occurs when the FPS emulation
is active.)
Solution:
Press the button.
Cause:
Memory overflow error
Solution:
Press the button.
Cause: No
MFF installed
Solution:
Install the MFF.
5-14
User’s Manual