Filter
Top Products
Error Indications
Message
MOTOR FAILURE n
NO PROCESS UNIT
OVERRUN ERROR
PAPER JAMn
PS ERROR mn
Source
PAPER OUT
STACKER FULL
SYSTEM ERROR n
TRAYn MISS SET
TONER EMPTY
Causes and solutions
Cause:
Malfunction in the feed motor, etc.
Solution:
If the error recurs, consult your
dealer for service.
Cause:
No print unit is installed.
Solution:
Install the print unit.
Cause:
Incomplete in extracting
compressed data
Solution:
Press the button.
Cause:
Paper jam in the specified position
Solution:
Clear the jammed paper from
the following area:
0:
Pick roller, 1: Entry to paper path
2: Paper path, 3: Ejection from paper path
4: Duplex unit
Cause:
A PostScript error
Solution:
If the error recurs, consult your
dealer for service.
Cause:
Paper out in the specified paper
source
Solution:
Supply paper.
Cause:
Paper stacker full
Solution:
Remove paper from the paper
stacker.
Cause:
A system error on the controller
board
Solution:
If the error recurs, consult your
dealer for service.
Cause:
Paper tray installed incorrectly
Solution:
Install the paper tray.
Cause:
Toner runs out.
Solution:
Replace toner bottle and heat
roller cleaner.
User’s Manual
5-15