Filter
Top Products
5.
Release the ZIF connector (3) to which the keyboard light cable is attached, and then disconnect
the keyboard light cable (2) from the system board.
6. Remove the keyboard.
Reverse this procedure to install the keyboard.
Top cover
Description Spare part number
Top cover (includes TouchPad and cable) 603793-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 37).
5. Remove the memory module compartment cover (see
Memory module on page 42).
6. Remove the keyboard (see
Keyboard on page 50).
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the four rubber feet (1) from the base enclosure. The rubber feet are included in the
Rubber Feet Kit, spare part number 603798-001.
52 Chapter 4 Removal and replacement procedures ENWW