Filter
Top Products
11.
If it is necessary to replace the display hinges and hinge covers:
a. Remove the two Phillips PM2.0×4.0 screws (1) that secure the hinge covers to the display
bezel.
b. Remove the hinge covers (2).
c. Remove the six Phillips PM2.5×5.0 screws (1) that secure the hinges to the display panel.
d. Remove the four Phillips PM2.0×4.0 screws (2) that secure the hinges to the display panel.
e. Remove the hinges (3). The hinge covers are available using spare part number
604063-001. The hinges are available using spare part number 603778-001.
ENWW
Component replacement procedures
75