Filter
Top Products
3.
Remove the subwoofer (4).
NOTE: When removing the subwoofer, make note of the location of the isolators (5) that are
installed in screw holes.
Reverse this procedure to install the subwoofer.
Display assembly
NOTE: The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, and 2 wireless antenna cables and transceivers.
Description Spare part number
17.3-in AG, FG, FHD 603774-001
17.3-in AG, FG, HD 603773-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 37), and then remove the following components:
a. Hard drive cover (see
Primary hard drive on page 38)
b. memory module compartment cover (see
Memory module on page 42).
c. Keyboard (see
Keyboard on page 50)
d. Top cover (see
Top cover on page 52)
70 Chapter 4 Removal and replacement procedures ENWW