Filter
Top Products
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board and release the cable from the clip
(2) built into the base enclosure.
2. Disconnect the Bluetooth module cable (3) from the system board.
3. Release the wireless antenna cables (4) from the opening in the base enclosure.
4. Release the wireless antenna cables from the clips built into the base enclosure (5) and subwoofer
(6).
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other computer
components.
5. Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
6. Remove the display assembly (2).
ENWW
Component replacement procedures
71